論文專著：

發表論文250篇，其中，SCI收錄102篇、EI收錄116篇，SCI論文他人引用80篇700余次，中國機械工程學會金獎論文1篇，在科學出版社出版著作1部。

 

出版專著：

《鎂合金科學與技術》 科學出版社 2007

 

發表論文：

2011：

1.Tao Peng, QudongWang, JinbaoLin, ManpingLiu, HansJ.Roven. Microstructure and enhanced mechanical properties of an Mg–10Gd–2Y–0.5Zr alloy processed by cyclic extrusion and compression. Materials Science and Engineering A, 2011, 528:1143-1148

2.Wei Guo, Qudong Wang, Manping Liu, Tao Peng, Xintao Liu, Hao Zhou. Microstructure and Mechanical Performance of AZ31-1.7 wt.% Si Alloy Processed by Cyclic Channel Die Compression. Materials Science Forum, 2011(667-669): 457-461

3.Xintao Liu, Manping Liu, Qudong Wang, Wei Guo, Dongdi Yin. Microstructure and Mechanical Properties of Mg-3Y Binary Alloy Processed by Cyclic Extrusion and Compression. Materials Science Forum, 2011(667-669): 767-771

4.Jirang Cui, Wei Guo, Hans Jørgen Roven, Qudong Wang, Yongjun Chen, Tao Peng. Recycling of Aluminum Scrap by Severe Plastic Deformation. Materials Science Forum, 2011(667-669): 1177-1182

5.V. Janik, D.D. Yin, Q.D. Wang, S.M. He, C.J. Chen, Z. Chen, C.J. Boehlert. The Elevated-Temperature Mechanical Behavior of peak-aged Mg-10Gd-3Y-0.4Zr Alloy. Materials Science and Engineering A, 2011(A528): 3105-3112

6.D.D. Yin, Q.D. Wang, Y. Gao, C.J. Chen, J. Zheng. Effects of heat treatments on microstructure and mechanical properties of Mg–11Y–5Gd–2Zn–0.5Zr (wt.%) alloy. Journal of Alloys and Compounds 2011(509):1696–1704

7.Vit Janik, Qudong Wang, Dongdi Yin, Wenjian Ding. Influence of Thermal and Thermo-mechanical Processing on the Creep Resistance of Mg-10Gd-3Y-0,4Zr Alloy.Materials Science Forum, 2011(675-677): 487-490(The 7th International Forum on Advanced Material Science and Technology. 26-28 June 2010, The Dalian University of Techonlogy, Dalian)

8. F. Yang, F. Lv, X.M. Yang, S.X. Li, Z.F. Zhang, Q.D. Wang. Enhanced very high cycle fatigue performance of extruded Mg-12Gd-3Y-0.5Zr magnesium alloy. Materials Science and Engineering A, 2011(A528): 2231-2238

 

9.LI Daquan, WANG Qudong, and DING Wenjiang. Effects of Ho on the microstructure and mechanical properties of Mg-Zn-Ho-Zr magnesium alloys. Rare Metals. 2011

 

10.Vit JANIK, Qudong WANG, Dongdi Yin, Wenjian DING. Creep cavtitation and its mechanisms in Mg-RE-Zr alloys. 11th IUMRS International Conference in Asia. Magnesium(Fourth International Conference on Magnesium). Sept. 25-28, 2010. Qingdao, China

 

11.張莉,王渠東,丁文江. 鎂基材料的摩擦磨損研究進展. 材料導報, 2011

12.張滿意,郭興伍,楊海燕,王渠東,丁文江.水熱條件下Mg-3Nd-Zn-Zr合金化學轉化膜的研究.腐蝕科學與防護技術,2011,23(3):

 

2010：

 

1.Qudong Wang, Yongjun Chen, Manping Liu, Jinbao Lin, Hans J. Roven. Microstructure evolution of AZ series magnesium alloys during cyclic extrusion compression. Materials Science and Engineering A, 2010, 527(9): 2265-2273

2.Qudong Wang, Jie Chen, Zheng Zhao, Shangming He. Microstructure and super high strength of cast Mg-8.5Gd-2.3Y-1.8Ag-0.4Zr alloy. Materials Science and Engineering A, 2010, 528: 323-328

3.Jiang Zheng, Qudong Wang, Zhengli Jin, Tao Peng. Effect of Sm on the microstructure, mechanical properties and creep behavior of Mg-0.5Zn-0.4Zr based alloys. Materials Science and Engineering A, 2010, 527(7-8):1677-1685

4. Wei Wang, Guohua Wu, Ming Sun, Yuguang Huang, Qudong Wang, Wenjiang Ding. Effect of Fluxes Containing YCl3 on Yttrium Loss, Mechanical and Corrossion Properties of Mg-10Gd-3Y-0.5Zr Alloy. Mater. Sci. Eng. A, 2010(527):1510-1515

5.WU Guo-hua(吳國華),WANG Wei(t瑋),SUN Ming(孫明),WANG Qu-dong(王渠東),DING wen-jiang(丁文江). Influence of GdCl3 addition on purifying effectiveness and properties of Mg-10Gd-3Y-0.5Zr alloy. Trans．NonferrousMet．Soc．China, 2010(20):1177-1183

5.G. H. Wu, W. Wang, Q. D. Wang, Y. G. Huang, M. Sun, W. J. Ding. Influence of RJ6 Flux Containing 5wt.% GdCl3 on Purifying Effectiveness and Properties of Mg-10Gd-3Y-0.5Zr Alloy. Mater. Trans., submitted ??

6.Jiang Zheng, Qudong Wang, Zhengli Jin, Tao Peng. The microstructure, mechanical properties and creep behavior of Mg-3Sm-0.5Zn-0.4Zr (wt.%) alloy produced by different casting technologies. Journal of Alloys and Compounds, 2010, 496(1-2):351-356

7.Tao Peng, Qudong Wang. Application of regression analysis to optimize hot compaction processing in an indirect solid-state recycling of Mg alloy. Materials Science Forum, 2010, 650: 239-245

8.T. Penga, Q. D. Wang, Y.K. Hanc, J. Zhenga, W. Guo. Consolidation behavior of Mg–10Gd–2Y–0.5Zr chips during solid-state recycling. Journal of Alloy and Compounds. 2010, 503: 253-259

9.Tao Peng, Qudong Wang, York Han, Jiang Zheng, Wei Guo. Microstructure and high tensile strength of Mg–10Gd–2Y–0.5Zr alloy by solid–state recycling. Materials Science and Engineering A, 2010, 528: 715-720

10.J. Chen, Q. D. Wang, T. Peng, Z. Zhao, W.J. Ding. Effect of extrusion temperature on microstructure and mechanical properties of Mg-8.5Gd-2.3Y-1.8Ag- 0.4Zr alloy solid state recycled by hot extrusion.Magnesium Technology 2010, Edited by Sean Agnew,Neale R. Neelameggham,Eric A. Nyberg, and Wim H. Sillekens. TMS(The Minerals, Metals & Materials Society), 2010. 319-322

11.Jiang Zheng, Qudong Wang, Zhengli Jin, Tao Peng. Effect of zinc additions on the microstructure mechanical properties and creep behavior of as-cast Mg-3Sm-0.4Zr (wt.%) alloy. Materials Science and Engineering A, 2010, 527: 4605-4612

12.WANG Qu-Dong(王渠東), GAO Yan(高巖), YIN Dong-Di(尹冬弟), Chen Chang-Jiang (陳長江). Characterization of phases in Mg-10Y-5Gd-2Zn-0.5Zr alloy processed by heat treatment. Trans. Nonfer. Metals Soc. China, 2010, 20(11): 2076-2080(為Prceeding of The 3rd CNY Symposium on Light Alloys 在中國有色金屬學報英文版正刊發表)

13.LI Da-quan(李大全), WANG Qu-dong(王渠東), DING Wen-jiang(丁文江), J. J. BLANDIN, M. SUERY. Influence of extrusion temperature on microstructure and mechanical properties of Mg-4Y-4Sm-0.5Zr alloy. Trans. Nonfer. Metals Soc. China, 2010, 20(7): 1311-1315(為Prceeding of The 3rd Asian Symposium on Magnesium Alloys (Part A)在中國有色金屬學報英文版正刊發表)

14.WU Guo-hua(吳國華), WANG Wei(王瑋),SUN Ming(孫明),WANG Qu-dong(王渠東),DING Wen-jiang. Influence of GdCl3 addition on purifying effectiveness and properties of Mg-10Gd-3Y-0.5Zr alloy. Trans. Nonfer. Metals Soc. China, 2010, 20(7): 1177-1183(為Prceeding of The 3rd Asian Symposium on Magnesium Alloys (Part A)在中國有色金屬學報英文版正刊發表),,

15.LIN Jin-bao( 林金保), WANG Qu-dong(王渠東), CHEN Yong-jun, LIU Man-ping, Hans J. Roven. EBSD CHARACTERIZATION OF THE MICROSTRUCTURE AND TEXTURE OF ZK60 ALLOY PROCESSED BY CYCLIC EXTRUSION AND COMPRESSION. Trans. Nonfer. Metals Soc. China, 2010, 20(11): 2081-2085(為Prceeding of The 3rd CNY Symposium on Light Alloys 在中國有色金屬學報英文版正刊發表

16.陳杰,王渠東,趙政,丁文江.高強高韌Mg-8.5Gd-2.0Y-1.0Ag-0.4Zr合金的組織與性能. 高技術通訊, 2010, (4):

17.郭煒,王渠東.大塑性變形制備超細晶復合材料的研究進展. 鍛壓技術, 2010, 35(1): 4-8

18.陳長江,王渠東,尹冬弟,丁文江.時效態Mg-Gd-Y-Zr 鎂合金壓縮性能和組織演變.鑄造,2010, 59(3): 304-307

19.陳長江,王渠東,尹冬弟,丁文江.鎂-稀土耐熱鎂合金活塞的開發研究.特種鑄造及有色合金, 2010, 30(5): 455-458

20.陳長江,王渠東,何志恒,尹冬弟,丁文江.耐熱稀土鎂合金活塞金屬型鑄造過程模擬分析.特種鑄造及有色合金, 2010, 30(6): 517-519

21.陳長江,王渠東,尹冬弟,丁文江.不同溫度下Mg-11Y-5Gd-2Zn-0.5Zr鎂合金的拉壓不對稱性.機械工程材料, 2010, 34(8): 64-67

22.張滿意,郭興伍,楊海燕,王渠東,丁文江.鎂合金水熱法表面處理.材料保護,2010,43(7):14-17

23.楊合,李落星,王渠東,郭良剛.輕合金成形領域科學技術發展研究. 機械工程學報, 2010,46(12):31-42

 

2009：

1.LIN JinBao, PENG LiMing, Wang QuDong, ROVEN J R, DING WenJiang. Anisotropic plastic deformation behavior of as-extruded ZK60 magnesium alloy at room temperature. Science in China E, 2009, 52(1):161-165

2.Jinbao LIN, Qudong Wang, Liming PENG, HANS J.Roven. Microstructure and high tensile ductility of ZK60 magnesium alloy processed by cyclic extrusion and comporession. Journal of Alloys and Compounds, 2009,476(1-2): 441-445

3.Yan Gao, Qudong Wang, Jinhai Gu, Yang Zhao, Yan Tong, Dongdi Yin. Comparison of microstructure in Mg-10Y-5Gd-0.5Zr and Mg-10Y-5Gd-2Zn-0.5Zr alloys by conventional casting. Journal of Alloys and Compounds, 2009,477(1-2): 374-378

4.T. Peng, Q. D. Wang, M. P. Liu, J. Zheng, J. B. Lin.An optimization approach for hot compaction technology of Mg-10Gd-2Y-0.5Zr alloy during solid-state recycling. Powder Technology, 2009, 194:142-148

5.T. Peng, Q. D. Wang, J. B. Lin. Microstructure and mechanical properties of Mg-10Gd-2Y-0.5Zr alloy recycled by cyclic extrusion compression. Materials Science and Engineering A, 2009, 516:23-30

6.Wei. Wang, Guohua Wu, Qudong Wang, Yuguang Huang, Wenjiang Ding. Gd contents, Mechanical and Corrosion Properties of Mg-10Gd-3Y-0.5Zr Alloy Purified by Fluxes Containing GdCl3 Additions. Materials Science and Engineering A, 2009, 507(1-2): 207-214

7.Qudong Wang, Daquan Li, J.J. Blandin, M. Suéry, P. Donnadieu, Wenjiang Ding. Microstructure and creep behavior of extruded Mg-4Y-4Sm-0.5Zr alloy. Materials Science and Engineering A. 2009, 516:189-192

8.Daquan Li, Qudong Wang, Wenjiang Ding. Effects of samarium on microstructure and mechanical properties of Mg-Y-Sm-Zr alloys during thermo-mechanical treatments. Journal of materials science, 2009, 44(12): 3049-3056

9.GAO Yan, WANG Qudong, GU Jinhai , ZHAO Yang. Effects of heat treatments on tensile properties and Creep Behavior of Mg-Y-Gd-Zr Alloys. Magnesium Technology 2009, Edited by Eric A. Nyberg, Sean R. Agnew, Neale R. Neelameggham, and Mihriban O. Pekguleryuz. (TMS2009)279-282

10.Wei Wang, Yuguang Huang, Guohua Wu, Qudong Wang, Ming Sun, Wenjiang Ding. Influence of flux containing YCl3 additions on purifying effectiveness and properties of Mg-10Gd-3Y-0.5Zr alloy. Journal of Alloys and Compounds, 2009, 480(2): 386-391

11.D.J. Li, Q.D.Wang, J.J.Blandin, M.Suery, J. Dong, X.Q. Zeng. High temperature compressive deformation behavior of an extruded Mg-8Gd-3Y-0.5Zr (wt.%) alloy. Materials Science and Engineering A, 2009, 526: 150-155

12.C. J. Chen, Q. D. Wang, D. D. Yin. Thermal Properties of Mg-11Y-5Gd-2Zn-0.5Zr (wt.%) Alloy. Journal of Alloys and Compounds, 2009, 487(1-2): 560-563

 

13.Yang ZHAO, Qudong WANG, Wei GAO. Microstructures and mechanical properties of Mg-7Y-3Sm-0.5Zr-xZn alloys. International Journal of Modern Physics B(2008年10月北京AMDP會議)

14.J.B. Lin, Q.D. Wang, L.M. Peng, Hans J. Roven. Finite element analysis of the equivalent strain distribution during cyclic extrusion and compression. (Submitted to Journal of Material Processing and Technology)

 

15.趙政,王渠東,丁文江. Mg-Gd-Ag-Zr合金的組織與力學性能.特種鑄造及有色合金,2009,29(5): 477-479

16.金正力,王渠東,鄭江,丁文江. Y含量對Mg-Zn-Zr合金組織和性能的影響. 特種鑄造及有色合金,2009, 29(7): 656-659

17.陳杰,王渠東,彭濤,丁文江.有色金屬固態回收技術研究進展與展望.材料導報,2009,23(6):77-80,89

18.陳長江,王渠東,尹冬弟,丁文江.內燃機活塞材料的研究進展.材料導報,2009, 23(8):62-65

19.陳長江,王渠東,尹冬弟,丁文江. 兩種Mg-Gd-Y-Zr鎂合金的熱物理性能. 特種鑄造及有色合金,2009,29(10):950-952

20.陳長江,王渠東,尹冬弟,丁文江. Mg-11Y-5Gd-2Zn-0.5Zr合金的顯微組織和力學性能. 材料科學與工程學報,2009,27(6):829-833

21.郭煒,王渠東.大塑性變形制備超細晶儲氫材料的研究進展.材料導報, 2009,23(10): 71-74

22.慕東,王渠東,沈保羅.滲硼對鋼鐵表面組織與性能影響的研究現狀.材料導報,2009,23(7):45-48

23.Xiaoming YANG, Hujie YANG, Fan YANG, Shuming YIN, Wei WANG, Shouxin LI, and Qudong WANG. Tensile and Isothermal Fatigue Behaviors of Mg-12Gd-3Y-0.5Zr Alloy at High Temperatures. Journal of Materials Sciences and Technology, 2009, 25(06) 731-737

24.范亞夫, 趙寶榮, 王渠東等. Mg-Gd-系變形鎂合金抗彈性能實驗研究[J].彈道(已投稿).

25.YAFU FAN, BAORONG ZHAO, QUDONG WANG. Experimental studies on dynamic mechanical behaviors and anti-projectile capabilities of extruded magnesium alloy [J].Int. J. of Modern Physics B. (2008年10月北京AMDP會議)

26.范亞夫,王渠東.Mg-Gd-Y系變形鎂合金Johnson-Cook材料模型參數的實驗測定[J]. 爆炸與沖擊(20090213待投稿).

27.J. Chen, Q. D. Wang, Z. Zhao, W. J. Ding. Super high strength Mg-9.8Gd-2.7Y-2.0Ag-0.4Zr cast magnesium alloy. Mater. Sci. Eng. A, 200906需要修改

 

2008：

1.Wang Qudong, Wei Yinhong, Y. Chino, and M. Mabuchi. High strain rate superplasticity in rolled AZ91 magnesium alloy. RARE METALS, 2008, 27(1):23-26

2.Q. D. Wang, J. B. Lin, M. P. Liu, W. J. Ding. Effect of trace Ti on the microstructure and mechanical properties of AM50 alloy. International Journal of Materials Research(formerly Z. Metallkd.), 2008, 99(7):761-765

3.Y. J. Chen, Q. D. Wang, H. J. Roven, M. P. Liu, M. Karlsen, Y. D. Yu and J. Hjelen. Network-shaped fine-grained microstructure and high ductility of magnesium alloy fabricated by cyclic extrusion compression.Scripta Materialia, 2008, 58(4): 311-314

4.Daquan Li, Qudong Wang, Wenjiang Ding. Precipitate phases in the Mg-4Y-4Sm-0.5Zr alloy. Journal of Alloys and Compounds. 2008, 465:119-126

5.Y. J Chen, Q. D. Wang, H. J. Roven, M. Karlsen, Y. D. Yu, M. P. Liu, J. Hjelen. Microstructure evolution in magnesium alloy AZ31 during cyclic extrusion compression. Journal of Alloys and Compounds, 2008, 462: 192-200

6.GAO Yan, WANG Qudong, GU Jinhai , ZHAO Yang , TONG Yan. Effects of heat treatments on microstructure and mechanical properties of Mg-15Gd-5Y-0.5Zr alloy.Journal of Rare Earth, 2008, 26,298-302. (SCI 306UI) (EI 081911243892)

7.GAO Yan, WANG Qudong, GU Jinhai, ZHAO Yang, Comparison of microstructure in Mg-10Y-5Gd-0.5Zr and Mg-10Y-5Gd-2Zn-0.5Zr alloys by conventional casting，Journal of Alloys and Compounds, 2009, 477: 374-378

8.Jinbao Lin, Qudong Wang, Liming Peng and Tao Peng. Effect of Cyclic Extrusion and Compression Processing on Microstructure and Mechanical Properties of As-Extruded ZK60 Magnesium Alloy. Materials Transaction, 2008, 49(5):1021- 1024

9.J.B. Lin, Q.D. Wang, L.M. Peng, H.J. Roven. Microstructure and high tensile ductility of ZK60 magnesium alloy processed by cyclic extrusion and compression. J Alloys and Compounds. 2009,476(1-2): 441-445

10.J.B. Lin, Q.D. Wang, L.M. Peng, H.J. Roven. Study on deformation behavior and strain homogeneity during cyclic extrusion and compression. Journal of Materials Science, 2008. 43(21): 6920-6924

11.Ding Wenjiang, Li Daquan, Wang Qudong and Li Qiang. Microstructure and mechanical properties of hot-rolled Mg-Zn-Nd-Zr alloys.Materials Science and Engineering A, 2008,483-484: 228-230

12.Yongjun Chen, Hans. J. Roven, Qudong Wang, Manping Liu and Jinbao Lin. Effect of the second phase on the microstructure of magnesium alloys during cyclic extrusion compression. Materials Science Forum, 2008, 584-586: 523-527

13.Jiang Zheng, Qudong Wang, Peng Zhao, Congbo Wu. Optimization of high pressure die-casting process parameters using artificial neural network. International Journal of Advanced Manufacturing Technology，2009，pp. 1-8， DOI: 10.1007/s00170-008-1886-6

14.Liming Peng, Lin Du, Li Jin, Qudong Wang, Wenjiang Ding. Anisotropy of the Damping Capacity of Rolled Mg--0.4Zn-0.6Zr(ZK01) Alloy. In Magnesium Technology. 2008. Edited by Mihriban O. Pekguleryuz, Neale R. Neelameggham, Randy S. Beals and Eri A. Nyberg.The Minerals, Metals & Materials Society(TMS). P.247-251

15.WANG Wei, WU Guo-hua, WANG Qu-dong, HUANG Yu-guang, SUN Ming, DING Wen-jiang. Investigation of flux containing GdCl3 on recycling Mg-Gd-Y -Zr Scraps. Trans. Nonferrous Met. Soc. China, 2008, 18(S1): s292-s298

16.王渠東,林金保，彭立明，陳永軍. 往復擠壓變形對ZK60鎂合金力學性能的影響.金屬學報, 2008, 44(1):55-58

17.高巖,王渠東, 趙 陽等. Mg97ZnY2合金中LPSO結構的研究現狀. 材料導報,2008,22(1):94-97

 

2007：

1.Q. D. Wang,Y. J Chen, J. B Lin, L. J Zhang, C. Q Zhai. Microstructure and properties of magnesium alloy processed by a new severe plastic deformation method. Materials Letters, 2007,61,(11):2213-2216

2.WANG Qudong, ZHAO Yang, LI Qinghua. Effects of CaCO3 Modificator on Microstructure and Mechanical Properties of Cast AZ91 Magnesium Alloy. Materials Science Forum, 2007, 546-549:155-158

3.Qudong Wang, Daquan Li, Qiang Li, Wenjiang Ding. Effects of Er on microstructure and mechanical properties of Mg-Zn-Er-Zr magnesium alloy. Materials Science Forum, 2007, 546-549:105-108

4.Qiang Li, Qudong Wang, Daquan Li and Wenjiang Ding. Effect of Nd and Y addition on microstructure and mechanical properties of extruded Mg-Zn-Zr alloy. Materials Science Forum, 2007, 546-549: 413-416

5.Lin Jinbao, Wang Qudong, Peng Liming, Chen Yongjun, Ding Wenjiang. Effect of cooling rate on the microstructure and mechanical properties of ZK60 alloy. Materials Science Forum 2007, 546-549: 319-322

6.Yongjun Chen, Qudong Wang, , Jinbao Lin, Lujun Zhang, Chunquan Zhai, Fabrication of bulk UFG magnesium alloys by cyclic extrusion compression. Journal of Materials Science, 2007, 42: 7601-7603

7.Chen Yongjun, Wang Qudong, Peng Jianguo,Zhai Chunquan, Ding wenjiang. Effect of extrusion ratio on the microstructure and mechanical properties of AZ31 Mg alloy. Journal of materials processing technology, 2007, 182(1-3):281-285

8.Zhang Lujun, Wang Qudong, Chen Yongjun, Lin Jinbao. Microstructure evolution and mechanical properties of an AZ61 Mg alloy through cyclic extrusion compression. Materials Science Forum, 2007, 546-549:253-256

9.ZHAO Yang, WANG Qudong, GU Jinhai, GAO Yan, TONG Yan. Microstructure and Mechanical Properties of Mg-Gd-Sm-Zr alloy. Materials Science Forum, 2007, 546-549:159-162

10.GAO Yan, WANG Qudong, GU Jinhai, ZHAO Yang, TONG Yan. Mechanical Properties and Creep Behavior of Mg-Gd-Y-Zr Alloys. Materials Science Forum, 2007, 546-549: 163-166

11.Peng Zhao, Qudong Wang, Chunquan Zhai, Wenjiang Ding. Tensile and compressive creep behavior of coarse-grained Mg-Al-Sr castings. Materials Science Forum, 2007, 546-549:171-174

12.Daquan Li, Qudong Wang, Wenjiang Ding. INFLUENCE OF ROLLING TEMPERATURE ON MICROSTRUCTURE AND TENSILE PROPERTIES OF AZ31 SHEETS. Materials Science Forum, 2007, 546-549:311-314

13.Peng Zhao, Qudong Wang, Chunquan Zhai and Yanping Zhu. Effects of strontium and titanium on the microstructure, tensile properties and creep behavior of AM50 alloys. Materials Science and Engineering A, 2007, 444(1-2): 318-326

14.Li, Q., Wang, Q., Wang, Y., Zeng, X., Ding, W. Effect of Nd and Y addition on microstructure and mechanical properties of as-cast Mg-Zn-Zr alloy. Journal of Alloys and Compounds, 2007, 427 (1-2), pp. 115-12

15.Peng Zhao, Qudong Wang, Liufa Liu, Zhongshan Wei, Chunquan Zhai. Fluidity of Mg-Al-Ca alloys in the high-pressure die casting process. International Journal of Materials Research (formerly: Zeitschrift fuer Metallkunde), 2007, 98(1): 33-38

16.Daquan Li, Qudong Wang, Wenjiang Ding. Effects of heat treatments on microstructure and mechanical properties of Mg-4Y-4Sm-0.5Zr alloy. Materials Science and Engineering A, 2007, 448:165-170

17.Zhou Yang, Peng Liming, Wang Qudong, Lin Jinbao, Ding Wenjiang. Influence of cooling rates on the dentrite morphology and hardness of the surface-chilled Mg-10Gd-3Y magnesium alloy. Materials Science Forum, 2007, 546-549:175-178

18.Yan Gao, Qudong Wang, Jinhai Gu, et al.Behavior of Mg-15Gd-5Y-0.5Zr alloy during solution heat treatment from 500 to 540 degrees.Materials Science & Engineering A, 2007, 459(1-2): 117-23(SCI 171IL) (EI 071610560537)

19.丁文江等著.鎂合金科學與技術.科學出版社.2007.1(其中,王渠東著12章48.9萬字的3章13萬余字)

20.童炎, 王渠東, 高巖, 顧金海. Mg-13Gd-3Y-0.4Zr合金熱處理工藝優化及其性能,輕金屬,2007,(3):45-49

21.王瑋, 吳國華, 王渠東,丁文江. 鎂合金非熔劑凈化工藝研究進展. 鑄造設備研究, 2007, (4): 42-46

22.杜 林,王渠東,彭立明,章禎彥,馬 嵐. 擠壓溫度對Mg-0.4Zn-0.6Zr(ZK01)合金力學性能和阻尼性能的影響.材料導報,2007,21(5):31-33

 

2006：

1.WANG Qudong, PENG Jianguo, Suéry Michel, Jean-Jacques Blandin. Effects of aging on the microstructures and mechanical properties of extruded AM50+xCa magnesium alloys. RARE METALS, 2006,25(4):377-381

2.Wang Qudong, Chen Yongjun, Zhang Lujun etc. Microstructure and mechanical properties of AZ31-0.5wt pct Si alloy processed by ECAP. Transactions of Nonferrous Metals Socity of Chian, 2006, 16: s1660-s1663

3.Lin Jinbao, Wang Qudong, Chen Yongjun, Zhang Lujun. Effect of large deformation on the microstructure of ZK60 alloy. Transactions of Nonferrous Metals Socity of China, 2006, 16: s1750-s1753

4.Chen Yongjun, Wang Qudong, Peng Jianguo, Zhai Chunquan. Improving the mechanical properties of AZ31 Mg alloy by high ratio extrusion. Materials Science Forum, 2006,503-504: 865-870

5.Li Daquan, Wang Qudong, Wenjiang Ding. Characterization of phases in Mg-4Y-4Sm-0.5Zr alloy processed by heat treatment. Materials Science and Engineering A, 2006, 428:295-300

6.Chen Yongjun, Wang Qudong, Lin Jinbao. Zhai Chunquan. Microstructure and mechanical properties of AZ31 Mg alloy processed by high ratio extrusion. Transactions of Nonferrous Metals Socity of China, 2006, 16: s1875-s1878

7.Peng Zhao, Haoran Geng, Qudong Wang. Effect of melting technique on the microstructure and mechanical properties of AZ91 commercial magnesium alloys. Materials Science and Engineering A, 2006, 429: 320–323

8.H. T. Zhou, C. M. Liu, Z. J. Liu, J. Zhang, J. R. Ji, and Q. D. Wang. The Microstructures and Tensile Properties of AZ61-Re Alloy. Magnesium Technology 2006. P511-514

9.王渠東,彭建國,丁文江, M. Suéry, J. J. Blandin. 熱處理對擠壓添加鈣AM50鎂合金組織及力學性能的影響.機械工程材料,2006,30(8):5-9

10.陳勇軍,王渠東,李德江,林金保,翟春泉,丁文江. 往復擠壓工藝制備超細晶材料的研究與發展.材料科學與工程學報,2006, 24(1): 152-155

11.陳勇軍,王渠東,翟春泉,丁文江.大塑性變形制備高強鎂合金的研究與展望.機械工程材料, 2006,(3):12-15

12.吳從波,王渠東,趙鵬.Fe、Ni、Cu對AXJ530鎂合金腐蝕性的影響.特種鑄造及有色合金,2006,26(11):736-738

13.林金保,王渠東,陳永軍.鎂合金塑性成形技術的研究進展. 輕合金加工技術, 2006,(2);16-20

14.李大全,王渠東,丁文江. 稀土在變形鎂合金中的應用. 輕合金加工技術,2006, 37(12): 5-8

 

2005：

1.Wang Qudong, Chen Yongjun, Peng Jianguo, Liu Manping, Ding Wenjiang, M. Suéry, J. J. Blandin. Microstructure and mechanical properties of AM50+xTi magnesium alloys extruded from as-cast and solution treated conditions. Materials Science Forum, 2005, 488-489: 629-632

2.Wang Qudong, Liu Manping, Ding Wenjiang, M. Suéry, J. J. Blandin. Microstructure and Mechanical Properties of Extruded AM50+xCa Magnesium Alloys. Materials Science Forum, 2005, 488-489: 119-122

3.Wang Qudong, Chen Yongjun, Chen Wenzhou, WEI Yin-hong, ZHAI Chun-quan, DING Wen-jiang. Centrifugally Cast Zn-27Al-xMg-ySi Alloys and Their In Situ (Mg2Si+Si)/ZA27 Composites. Mater. Sci. Eng. A. 2005, 394(1-2): 425-434

4.Qiang Li, Qudong Wang, Xiaoqin Zeng, Wenjiang Ding, Quanbo Tang, Shangdong Huang. Microstructure and Mechaical Properties of Extruded Mg-Zn-Nd-Y-Zr-Ca Alloy. Materials Science Forum, 2005, 488-489: 385-388

5.Manping liu, Qudong Wang, Xiaoqin Zeng, Guangyin Yuan, Yanping Zhu and Wenjiang Ding. Mechanical Properties and Creep Behavior of Mg-Al-Ca Alloys. Materials Science Forum, 2005, 488-489: 763-766

6.Peng Jianguo, Wang Qudong, Liu Manping, Chen Yongjun. Ding Wenjiang, M. Suéry1, J. J. Blandin.Effects of Heat Treatment on Microstructure and Mechanical Properties of Rolled AM50+xCa Alloys. Materials Science Forum, 2005, 488-489: 257-260

7.Qiang Li, Qudong Wang, Haitao Zhou, Xiaoqing Zeng, Ya Zhang, Wenjiang Ding. High strength extruded Mg-5Zn-2Nd-1.5Y-0.6Zr-0.4Ca alloy. Materials Letters, 2005, 59: 2549-2554

8.Zhou Hai-Tao, Yan An-Qing, Wang Qu-dong, Liu Chu-Ming. Dynamic recrystallization behavior of AZ61 magnesium alloy. Transactions of Nonferrous Metals Society of China, 2005, 15(5):1055-1061

9.Haitao Zhou, Xiaoqin Zeng, Liufa Liu, Qudong Wang, Yangping Zhu,Wenjiang Ding. Hot Compression Behavior of Liquidus Casting ZK60 Magnesium Alloy. Materials Science Forum, 2005, Vol. 488-489: 563-566

10.HE Shangming, PENG Liming, ZENG Xiaoqin, LIU Lipeng, WANG Qudong, DING Wenjiang, ZHU Yanping. Effects of variable La/Ce ratio on Microstructure and Mechanical Properties of Mg-5Al-0.3Mn-1RE Alloys. Materials Science Forum, 2005, 488-489: 231-234

11.王渠東,陳勇軍,陳文周,魏胤紅,翟春泉,丁文江. 離心鑄造Zn-Al-Mg-Si合金及其自生表面復合材料. 上海交通大學學報,2005,39(7):1109-1114

12.王渠東,陳勇軍,陳文周,魏胤紅,翟春泉,丁文江. 離心鑄造（Mg2Si+Si）自生增強鋅基自生復合材料的組織與性能.復合材料學報, 2005,22(3):109-115

13.付鵬懷,王渠東,蔣海燕,翟春泉.鎂合金熔煉技術研究進展.鑄造技術,2005,(6):489-492

14.彭建國,王渠東,曾小勤,丁文江. 鎂合金抗氧化及合金化阻燃研究進展. 輕合金加工技術, 2005,33(4): 16-20

15.趙鵬,王渠東,翟春泉.耐熱鑄造鎂合金及其蠕變行為的研究.特種鑄造及有色合金,2005,(Z1): 48-51

16.張陸軍,王渠東,陳勇軍.大塑性變形制備納米結構材料.材料導報,2005,19,(Special issue 5):12-16

17.陳勇軍,王渠東,彭建國,翟春泉,丁文江.大塑性變形制備細晶材料的研究、開發與展望. 材料導報,2005,19(4):77-80

18.黃曉鋒,王渠東,劉六法,朱燕萍,袁廣銀,盧晨,丁文江.混合稀土對Mg-5Al-1Si組織及性能的影響.稀有金屬材料與工程,2005,34(5):795-798

19.梁文科,朱建國,王渠東. NiTi形狀記憶合金疲勞行為的研究現狀. 材料導報, 2005,19,(Special issue 5):404-405,409

 

2004：

1.Qiang, Li; Dong, Wang Qu; Qin, Zeng Xiao; Jiang, Ding Wen. Microstructure and mechanical properties of hot-extruded Mg-Zn-Nd-Y-Zr alloy. JOM, 2004,56(11):37

2.Zhou Haitao, Liu Liufa, Wang Qudong, Lu Da, Zeng Xiaoqin, Ding Wenjiang. Strain softening and hardening behavior in AZ61 magnesium alloy. Journal of Materials Science and Technology, 2004, 6:691-693

3.N. Mebarki, M. Suéry, Q. Wang, J. J. Blandin. Microstructural changes during partial remelting of the AZ91 alloy modified with Ca additions.Sept. 21-23, 2004, LIMASSOL, Cyprus Proceedings of the 8th International Conference on Semi-Solid Processing of Alloys and Composites, S2P 2004 , Pages 563-570

4.H. T. Zhou, X. Q. Zeng, Q. D. Wang, W. J. Ding. A flow stress model for AZ61 magnesium alloy. Acta metallurgic sinica, 2004, 17(2):155-160

5.Liufa LIU, Haitao ZHOU, Qudong WANG, Yanping ZHU, Wenjiang DING. DYNAMIC RECRYSTALLIZATION BEHAVIOR OF AZ61 MAGNESIUM ALLOY. Adv. in Tech. of Mat. And Proc. J. (ATM), 2004, 6(2):158-165

6.Rongshi CHEN, J. J. Blandin, M. Suéry, Qudong WANG, Enhou HAN. Thermomechanical Processing and Superplasticity of AZ91 Magnesium Alloy. J. Mater. Sci. Technol., 2004, 20(3):295-297

7.Zhou-HT, Zeng-XQ, Liu-LL, Dong-J, Wang-QD, Ding-WJ, Zhu-YP. MICROSTRUCTURAL EVOLUTION OF AZ61 MAGNESIUM ALLOY DURING HOT DEFORMATION. MATER SCI TECHNOL 2004, 20(11): 1397-1402

8.王渠東,丁文江.鎂合金及其成形技術的國內外動態與發展.世界科技研究與發展.2004, 26(3):39-46

9.王渠東,丁文江.鎂合金研究開發現狀與展望.世界有色金屬.2004,(7):8-11

10.王渠東,丁文江.鎂合金及其成形技術的最新發展.21世紀材料成形加工技術與科學.柳百成等編. P56-73. 機械工業出版社,2004,3

11.黃曉鋒,王渠東,曾小勤,朱燕萍,盧晨,丁文江.釹對Mg-5Al-1Si高溫蠕變及組織性能的影響.中國稀土學報,2004,22(3):361-364

12.黃曉鋒,王渠東,曾小勤,袁廣銀,朱燕萍,丁文江.稀土對AM50力學性能及高溫蠕變的影響.中國稀土學報,2004,22(4):493-496

13.黃曉鋒,王渠東,盧晨,丁文江. Si對AM50力學性能和高溫蠕變性能的影響.材料研究學報, 2004, 18(6): 630-634

14.周海濤,曾小勤,劉六法,王渠東,董杰,丁文江.熱變形工藝參數對超低碳貝氏體鋼轉變行為和顯微結構的影響.上海交通大學學報,2004,38(7):1091-1095,1110

 

2003：

1.Qudong Wang, Yinhong Wei, Wenzhou Chen, Yanping Zhu, Chunjiang Ma, Wenjiang Ding. In situ surface composites of (Mg2Si+Si)/ZA27 fabricated by centrifugal casting.Materials Letters, 2003, 57:3851-3858

2.ZHOU Hai-tao, WANG Qu-dong, WEI Yin-hong, DING Wen-jiang, ZHU Yan-ping, Y. Chino, M. Mabuchi. Flow stress and microstructural evolution in as rolled AZ91 alloy during hot deformation. Trans. Nonferrous Met. Soc. China, 2003,13(6):1265-1270

3.Wang Yeshuang, Wang Qudong, Ma chunjiang, Ding Wenjiang, Zhu Yanping. Effects of Zn and RE additions on the solidification behavior of Mg-9Al magnesium alloy. Materials Science and Engineering A, 2003,A342(1-2):178-182

4.Y. H. Wei, Q. D. Wang Y. P. Zhu etc. Superplasticity and Grain Boundary Sliding in Rolled AZ91 Magnesium Alloys at High Strain Rates, Materials Science and Engineering A，2003, 360(1-2):107-115

5.Man Ping Liu, Qu Dong Wang, Xiao Qin Zeng, Yin Hong Wei, Yan Ping Zhu, Chen Lu. Development of microstructure in solution-heat-treated Mg-5Al-xCa alloys. Z. Metallkd. 2003, 94(8): 886-891

6.Y.S.Wang, J. Z. Yu, Q. D. Wang, W. J.Ding. Heat treatment strengthening effects of rare earths on Mg-9Al alloy. Acta Metallurgic Sinica, 2003, 16(1):8-14

7.王渠東,魏胤紅,陳文周,朱燕萍,馬春江,丁文江.離心鑄造Mg2Si和Si自生增強的鋅基合金復合材料.中國有色金屬學報,2003,13(6):1441-1446

8.王業雙,王渠東,馬春江,丁文江，朱燕萍.Zn和RE對Mg-9Al合金熱裂傾向性的影響.中國有色金屬學報，2003，13(1)：40-45

9.王業雙,俞繼志,王渠東等.鎂合金熱烈行為研究的測試方法探討.材料導報,2003,17(11):72-74

10.周海濤,曾小勤,王渠東,丁文江.AZ31鎂合金擠壓工藝和組織性能分析.輕合金加工技術,2003,31(9):28-30

11.彭立明,曾小勤,朱燕萍,王渠東,丁文江.一種新型鎂合金的開發及其應用.有色金屬加工,2003,32(2):18-22

 

2002：

1.Wang Yeshuang, Wang Qudong, Wu Guohua, Zhu Yanping, Ding Wenjiang. Hot-tearing susceptibility of Mg-9Al-xZn alloy. Materials Letters, 2002,57:929-934

2.MANPING LIU, QUDONG WANG, ZILI LIU, GUANGYIN YUAN, GUOHUA WU, YANPING ZHU, WENJIANG DING.. Behavior of Mg-Al-Ca alloy during solution heat treatment at 415℃. J. Mater. Sci. Lett.2002,21:1281-1283

3.Yuan Guangyin, Wang Qudong, Ding Wenjiang. High temperature deformation behavior of permanent casting AZ91 alloy with and without Sb addition. J. Mater. Sci., 2002, 37:127-132

4.LIU Manping,WANG Qudong, ZENG Xiaoqin, LU Chen, ZHU Yanping, DING Wenjiang. Effects of solution heat treatment on the microstructures of Mg-5Al based alloys containing Ca and RE. RARE METALS,2002,21(Suppl.):54-59

5.Wang Yeshuang, Sun Baode, Wang Qudong, Zhu Yanping, Ding, Wenjiang. An understanding of the hot cracking mechanism in AZ91 magnesium alloy. Materials Letters, 2002,53(1-2):35-39

6.Zili Liu,Jingyu Hu, Qudong Wang,Ding Wenjiang,Zhu Yanping.Evaluation of the effect of vacuum on mold filling in the magnesium EPC process. J. Mater. Processing Technology, 2002,120:94-100

7.Manping Liu, Guangyin Yuan, Qudong Wang, Yinhong Wei, Wenjiang Ding, Yanping Zhu. Superplastic Behavior and Microstructural Evolution in a Commercial Mg-3Al-1Zn Magnesium Alloy. Mater. Trans., 2002,43(10): 2433-2436

8.G. Y. Yuan, Z. L. Liu, Q. D. Wang, W. J. Ding. Microstructure Refinement of Mg-Al-Zn-Si Alloys. Materials Letters, 56(2002),(1-2):53-58

9.Wang Yeshuang,Zhang Yongbo,Wang Qudong, Ma chunjiang, Ding Wenjiang, Zhu Yanping. MODELS FOR CASTING SOLIDIFICATION OF Mg-9Al ALLOY(in Chinese). ACTA METALLURGICAL SINICA, 2002, 38(4):78-84

10.Z. Liu, J. Hu, W. Ding, Q. Wang, Y. Zhu, Y. Lu, W. Chen. Effect of Processing Parameters on Mold Filling in Magnesium Alloy EPC Process. AFS Transactions, 2002, 108: 1425-1438

11.Zili Liu,Jingyu Hu, Qudong Wang,Ding Wenjiang,Zhu Yanping.Evaluation of the effect of vacuum on mold filling in the magnesium EPC process. J. Mater. Processing Technology, 2002,120:94-100

12.Manping Liu, Guangyin Yuan, Qudong Wang, Yinhong Wei, Wenjiang Ding, Yanping Zhu. Superplastic Behavior and Microstructural Evolution in a Commercial Mg-3Al-1Zn Magnesium Alloy. Mater. Trans., 2002,43(10): 2433-2436

13.G. Y. Yuan, Z. L. Liu, Q. D. Wang, W. J. Ding. Microstructure Refinement of Mg-Al-Zn-Si Alloys. Materials Letters, 56(2002),(1-2):53-58

14.Z. Liu, J. Hu, W. Ding, Q. Wang, Y. Zhu, Y. Lu, W. Chen. Effect of Processing Parameters on Mold Filling in Magnesium Alloy EPC Process. AFS Transactions, 2002, 108: 1425-1438

15.丁文江,王渠東,劉滿平.輕合金技術新進展.2002高技術發展報告.中國科學院編,科學出版社.P60-74

16.魏胤紅,王渠東,劉滿平,丁文江.鎂合金超塑性的研究現狀及發展趨勢.材料導報,2002,16(9):20-23

17.魏胤紅,王渠東,周海濤,朱燕萍,丁文江,Y. Chino,M. Mabuchi.軋制AZ91鎂合金超塑性研究.高技術通訊,2002,12(9):52-55,51

18.袁廣銀,劉滿平,王渠東,朱燕萍,丁文江.Mg-Al-Zn-Si合金的顯微組織細化.金屬學報,2002,38(10):1105-1108

19.劉滿平,馬春江,王渠東,吳國華,朱燕萍,丁文江.工業態AZ31鎂合金的超塑性變形行為.中國有色金屬學報,2002,12(4):797-801

20.宋海寧,袁廣銀,王渠東,朱燕萍,丁文江. 耐熱Mg-Zn-Si-Ca合金的顯微組織和力學性能.中國有色金屬學報,2002,12(5):956-960

21.王業雙,張詠波,王渠東,馬春江,丁文江,朱燕萍. Mg-9Al合金鑄造凝固模型.金屬學報,2002, 38(4):78-84

22.彭立明,曾小勤,朱燕萍,王渠東,丁文江.一種新型鎂合金的開發及其應用.2002年中國材料研討會論文摘要集,中國材料研究學會學術部.北京,2002,10,21-24.P.F5

23.魏胤紅,王渠東,丁文江,朱燕萍.軋制AZ91鎂合金超塑性變形過程中的微觀結構演變, 2002年中國材料研討會論文摘要集,中國材料研究學會學術部.北京,2002,10,21-24.P.F24

24.魏胤紅,王渠東,丁文江.輕合金鑄鍛復合成型技術及其發展.首屆中國國際輕金屬冶煉加工與裝備會議文集.周鴻章主編，2002.4.25-28: P.74-76

25.彭立明,曾小勤,曹幸,朱燕萍,王渠東,丁文江.固溶處理對含稀土AM60B和AZ91D鎂合金組織的影響.首屆中國國際輕金屬冶煉加工與裝備會議文集.周鴻章主編,2002.4.25-28: P.239-243

 

2001：

1.Wang Qudong, Chen Wenzhou, Zeng Xiaoqin,Lu Yizhen,Ding Wenjiang, Zhu Yanping, Xu Xiaoping, M. Mabuchi. Effects of Ca addition on the microstructure and mechanical properties of AZ91 magnesium alloy. J. Mater. Sci., 2001, 36(12): 3035-3040

2.Wang Qudong,Chen Wenzhou, Ding Wenjiang,Zhu Yanping M. Mabuchi. Effect of Sb on the Structure and Properties of AZ91 Magnesium Alloy. Metall. & Mater. Trans.,2001,32A(3):787-794

3.Chen Wenzhou, Wang Qudong,Zhai Chunquan et al.Functionally graded Zn-Al-Si in-situ composites fabricated by cebtrifugal casting. J. Mater. Sci. Lett.2001, 20(9): 823-826

4.X. Q. ZENG,Q. D. WANG,Y. Z. LU,W. J. DING,C. LU,Y. P. ZHU,C. Q. ZHAI,X. P. XU. Kinetic study on the surface oxidation of the molten Mg-9Al-0.5Zn-0.3Be alloy. J. Mater. Sci.,2001,36(10):2499-2504

5.Zeng Xiaoqin, Wang Qudong, Lu Yizhen Zhu Yanping, Ding Wenjiang, Zhao Yunhu. Influence of beryllium and rare earth additions on ignition-proof magnesium alloys. J. Mater. Processing Technol., 2001, 112(1): 17-23

6.Zeng Xiaoqin, Wang Qudong, Lü Yizhen, Ding Wenjiang, Zhu Yanping. Zhai Chunquan, Lu Chen, Xu Xiaoping. Behavior of Surface Oxidation on Molten Mg-9Al-0.5Zn-0.3Be Alloy. Mater. Sci. & Eng. A, 2001,301(2):154-161

7.Yizhen Lü, Qudong Wang, Xiaoqin Zeng et al. Effect of Si on the the precipitation behavior of Mg-6Al alloy. J. Mater. Sci. Lett., 2001,20:397-399

8.Y. Z. Lü, Q. D. Wang, X. Q. Zeng, Y. P. Zhu, W. J. Ding. Behavior of Mg-6Al-xSi Alloys During Solution Treatment at 420℃. Mater. Sci. Eng. A, 2001,301(2): 255-258

9.Yizhen Lü, Qudong Wang, Xiaoqin Zeng, Wenjiang Ding Yanping Zhu. Effects of Si on the Microstructure, Fluidity, Mechanical Properties and Fracture Behavior of Mg-6Al Alloy. Mater. Sci. Technol., 2001, 17(2):207-214

10.Lan Jie, He Junjie, Ding Wenjiang, Wang Qudong, Zhu Yanping. Study on Heterogeneous Nuclei in Cast H13 Steel Modified by Rare Earth. Journal of Rare Earths, 2001,19(4):280-283

11.CHUNJIANG MA, DI ZHANG, WENJIANG DING, QUDONG WANG. Damping capacity of SiCw/MgLiAl composites. J. Mater. Sci. Lett., 2001, 20: 3327-3329

12.曾小勤,王渠東,呂宜振,丁文江,朱燕萍,翟春泉,盧晨.Mg-9Al-0.5Zn-0.1Be-xCa合金組織和力學性能研究.機械工程材料,2001,25(5):15-18

13.陳文周,王渠東,翟春泉,馬春江,朱燕萍,何畏,丁文江.離心鑄造自生Zn-Al-Si表面復合材料的組織與性能.中國有色金屬學報,2001,11(3):416-423

14.劉新寬,向陽輝,王渠東,丁文江.Mg合金的防蝕處理.腐蝕科學與防護技術,2001,13(4):211-213,222

15.王業雙,丁文江,王渠東.微機系統在合金熱裂研究中的應用.中國有色金屬學報,2001,11(S1):52-55

16.王業雙,丁文江,王渠東,朱燕萍.AZ91合金的熱裂行為研究.金屬學報,2001, 37(5):527-530

17.王業雙,張詠波,丁文江,王渠東.鎂合金的熱裂行為測試研究.特種鑄造及有色合金.2001,(3):13-16

18.蘭杰,賀俊杰,丁文江,王渠東,朱燕萍.變質CH13鋼中CeO3異質核心作用的研究.中國稀土學報2001,19(2):142-145

19.翟春泉,曾小勤,丁文江,王渠東,呂宜振,徐小平.鎂合金的開發與應用.機械工程材料,2001,25(1):6-10

20.袁廣銀,孫揚善,曾小勤,呂宜振,王渠東,丁文江.Bi對AZ91鎂合金時效析出動力學過程的影響.上海交通大學學報,2001,35(3):451-456

 

2000：

1.Wang Qudong,Lu Yizhen, Zeng Xiaoqin,Ding Wenjiang,Zhu Yanping.EFFECTS OF RE ON THE MICROSTRUCTURE AND PROPERTIES OF AZ91 MAGNESIUM ALLOY. Trans. of Nonferrous Metals Society of China, 2000,10(2): 235-239

2.Yizhen Lü, Qudong Wang, Xiaoqin Zeng, Wenjiang Ding Yanping Zhu. Effects of rare earths on the microstructure, properties and fracture behavior of Mg-Al alloys. Mater. Sci. Eng. A, 2000, 278:66-76

3.Y. Z. Lü, Q. D. Wang, W. J. Ding et al. Fracture behavior of AZ91 magnesium alloy. Materials Letters, 2000, 44(5):262-268

4.Lü Yizhen, Wang Qudong, Ding Wenjiang, Zeng Xiaoqin. Fluidity of Mg-Al-alloys and the effect of alloying elements. Z. Metallkunde, 2000,91(6): 477-482

5.X. Q. Zeng, Q. D. Wang, Y. Z. Lü,W. J. Ding, C. Lu, Y. P. Zhu, C. Q. Zhai, X. P. Xu. Study on Ignition-proof Magnesium Alloy with Beryllium and Earth Additions. Scripta MATERILIA, 2000,43(5):403-409

6.Lan Jie, He Junjie, Ding Wenjiang, Wang Qudong, Zhu Yanping. Effect of Rare Earth on the Microstructure and Impact Toughness of Cast 0.4C-5Cr-1.2Mo-1.0V Steel. ISIJ International, 2000, 40(12):1275-1282

7.王渠東,曾小勤,呂宜振,丁文江.高溫鑄造鎂合金的研究與應用.材料導報2000,(3):21-23

8.王渠東,呂宜振,曾小勤,丁文江,盧晨.鎂合金在電子器材殼體中的應用.材料導報,2000,14(6):22-24

9.王渠東,曾小勤,呂宜振,丁文江.高溫鑄造鎂合金的研究與應用.材料導報2000,(3):21-23

10.王渠東,呂宜振,曾小勤,丁文江,盧晨.鎂合金在電子器材殼體中的應用.材料導報,2000,14(6):22-24

11.王渠東,丁文江.轎車用阻燃鎂合金的研制.材料導報,2000,14(特刊):53-56

12.王業雙,王渠東,丁文江,盧晨.合金的熱裂形成機理及其研究進展. 特種鑄造及有色合金,2000,(2):48-50

13.曾小勤,王渠東,呂宜振,丁文江,盧晨,朱燕萍,翟春泉,徐小平. Mg-9Al-0.5Zn-0.3Be熔體表面氧化行為.中國有色金屬學報, 2000, 10(5): 667-671

14.趙云虎,王渠東,丁文江,曾小勤,呂宜振,朱燕萍.Be對鑄造Mg合金組織和力學性能的影響. 特種鑄造及有色合金,2000,(3):10-12

15.劉子利,王渠東,丁文江.消失模鑄造充型過程的研究進展及展望.鑄造,2000,(4):213-218

16.呂宜振,王渠東,曾小勤,丁文江,朱燕萍.鎂合金在汽車上的應用現狀及發展趨勢.材料導報,2000, 14(特刊):57-60

17.倪紅軍,王渠東,丁文江.鎂合金半固態鑄造成形技術(SSP)的研究與應用,鑄造技術,2000,(5):36-39

18.胡晶玉,劉子利,王渠東,丁文江.AZ91鎂合金負壓消失模鑄造流動性的研究.特種鑄造及有色合金,2000,(3):16-19

19.曾小勤,翟春泉,朱燕萍,王渠東,丁文江.鎂合金錠質量控制.特種鑄造及有色合金,2000, (增刊1):40-42

20.趙云虎,曾小勤,丁文江,王渠東,朱燕萍.Be和Ca對 Mg-9Al-0.5Zn合金表面氧化行為的影響.中國有色金屬學報,2000,10(6):847-852

21.劉子利,胡晶玉,丁文江,王渠東.澆注系統對AZ91鎂合金消失模鑄造流動性的影響,鑄造技術,2000,(4):43-45

22.劉新寬,馬明亮,周敬恩,王渠東,丁文江.球磨促進碳熱還原反應合成氮化鋁研究.功能材料,2000,31(1):82-83,86

23.蘭杰,賀俊杰,丁文江,王渠東,朱燕萍,翟春泉,徐小平.RE對鑄造H13鋼凝固組織和沖擊韌性的影響.鋼鐵,2000,35(10):48-50,66

24.劉新寬,馬明亮,席生歧,周敬恩,王渠東,丁文江.機械力活化合成機制研究,稀有金屬材料科學與工程,2000,29(6):382-385

25.劉新寬,馬明亮,席生歧,周敬恩,王渠東,丁文江.氧化鋁碳熱還原反應機制及其熱力學,中國有色金屬學報,2000,10(S1):46-49

26.劉新寬,馬明亮,席生歧,周敬恩,王渠東,丁文江.機械力活化合成納米晶氮化鋁研究,硅酸鹽學報,2000,28(5):468-471

27.劉新寬,馬明亮,席生歧,周敬恩,王渠東,丁文江.氧化鋁高能球磨時機械力化學效應研究.材料科學與工藝,2000,8(2):41-45

 

1999：

1.Wang Qudong, Zeng Xiaoqin, Lu Yizhen, Ding Wenjiang, Zhu Yanping. IGNITION-PROOF MAGNESIUM ALLOYS AND THEIR FOUNDRY TECHNOLOGY. Proc. 99’ Asian Industrial Technology Congress. HongKong. 1999.4.26-29

2.Wang Qudong, Lu Yizhen, Zeng Xiaoqin, Ding Wenjiang, Zhu Yanping, Li Qinghua,Lan Jie.Study on the Fluidity of AZ91+xRE Magnesium Alloy.Mater. Sci. & Eng. A, 1999, 271(1-2):109-115

3.Wang Qudong, Ding Wenjiang, Jin Junze.The step growth of primary silicon observed by decantation during centrifugal casting. Mater. Sci. & Techn. 1999, 15(8): 921-925

4.王渠東,程毓,曾小勤,丁文江.蠕墨鑄鐵排氣管質量的超聲波檢測.無損檢測,1999, 21(1):27-28

5.王渠東,呂宜振,曾小勤,丁文江.稀土在鑄造鎂合金中的應用.特種鑄造及有色合金,1999,(1):43-47

6.王渠東,丁文江,翟春泉,徐小平,金俊澤.鋁硅合金中初晶Si的臺階生長.上海交通大學學報.1999,33(2):142-145

7.王渠東,丁文江，金俊澤.離心鑄造鋁硅合金初晶自生復合材料的研究.特種鑄造及有色合金,1999,(增刊1):9-11

8.呂宜振,王渠東,曾小勤,丁文江,朱燕萍.鎂合金在汽車上的應用現狀.汽車技術,1999, (8):28-31

9.曾小勤,王渠東,呂宜振,朱燕萍,丁文江.阻燃鎂合金研究.鑄造,1999,(6):4-7

10.曾小勤,王渠東,呂宜振.鎂合金熔煉阻燃方法及進展.輕合金加工技術，1999,(9):5-8

11.曾小勤,王渠東,呂宜振,丁文江,朱燕萍.鎂合金應用新進展.中國鎂業,1999,(2):6-8

12.蘭杰,賀俊杰,王渠東,丁文江.鑄造模具研究概況.特種鑄造及有色合金,1999, (增刊1): 123-125

13.蘭杰,賀俊杰,王渠東,丁文江.鑄造模具的研究和應用.特種鑄造及有色合金.1999,(增刊1):123-125

 

1998：

1.王渠東,丁文江,金俊澤.離心鑄造復合材料的研究與發展.材料導報,1998,12(6):61-64

2.王渠東,丁文江,翟春泉,徐小平,金俊澤.固液反應合成鋁基自生復合材料.特種鑄造及有色合金,1998,(6):11-13

3.王渠東,丁文江,金俊澤,陳秋勇,尹衍升.覆砂金屬型Al-Fe合金自生梯度復合材料.鑄造,1998,(10):16-21

4.王渠東,丁文江,金俊澤.離心傾液法與初晶硅的生長.人工晶體學報,1998,27(1):94-99

5.王渠東,丁文江,金俊澤.離心鑄造過共晶Al-Si合金自生表面復合材料.復合材料學報,1998,15(3):7-11

6.曾小勤,王渠東,呂宜振,丁文江,朱燕萍.鎂合金應用新進展.鑄造,1998,(11): 39-43

7.呂宜振,翟春泉,王渠東,曾小勤,朱燕萍.壓鑄鎂合金的應用現狀及發展趨勢.鑄造,1998, (12):50-53

8.曾小勤,王渠東,呂宜振,丁文江,朱燕萍.鎂合金應用新進展.鑄造,1998,(11): 39-43

9.呂宜振,翟春泉,王渠東,曾小勤,朱燕萍.壓鑄鎂合金的應用現狀及發展趨勢.鑄造,1998, (12):50-53

 

1997：

1.Wang Qudong,Jin Junze.Centrifugal Casting In Situ Surface Composites of Al-20wt%Si Alloy. Proc. Fifth Asian Foundry Congress. Nanjing: Southeast University Press. 1997,9:P433-436

2.Wang Qudong,Jin Junze.In Situ Gradient Double-layer Composites by Centrifugal Casting Al-Fe Alloy.Trans.of Nonferrous Metals Society of China, 1997,7(1):125-130

3.王渠東,金俊澤.離心鑄造Al-20wt%Si合金自生表面復合材料的組織與性能.航空材料學報,1997,17(2):6-13

 

1996：

1.王渠東,金俊澤.離心鑄造Al-Cr合金自生梯度復合材料.鑄造,1996,(4):8-12

 

1995：

1.馮波,王渠東,趙家政.利用熱化學反應制備金屬基復合物.新技術新工藝,1995,(2):24-26

 

1994：

1.王渠東.噴射沉積金屬基復合材料的研究與發展.兵器材料科學與工程,1994,(2):11-18

2. 王渠東,曹興言,李隆盛.幾種干擾退火元素對離心鑄造球墨鑄鐵管退火過程的影響與控制.鑄鐵管,1994,(1):20-24

3.王渠東,金俊澤.離心鑄造Al-Fe合金復合管件.94’秋季中國材料研討會論文集,P221-224

 

1993：

1.王渠東,程毓.銻涂料對高碳鑄鐵組織的影響.新技術新工藝,1993,(1):6-8

2.王渠東.銻對高碳鑄鐵組織的影響.四川工業學院學報,1993,(1):35-41

 

1991：

1.王渠東,曹興言,李隆盛.錳、鉻、銅、錫對離心鑄造球墨鑄鐵管退火性能的綜合影響.球鐵, 1991,(1):3-6

2.王渠東,曹興言,李隆盛.離心鑄造球墨鑄鐵管組織和元素的分布.特種鑄造及有色合金, 1991,(3):3-6

3. 曹興言,王渠東,張馳,李隆盛,梁顯棟,王春成,張秀山,劉肇津.砷和鈦對離心鑄造球墨鑄鐵管組織和性能的影響.特種鑄造及有色合金,1991,(6):3-6

 

1990：

1.王渠東,曹興言,李隆盛.幾種干擾退火元素對離心鑄造球墨鑄鐵管退火性能的影響與控制. 鑄造,1990,(8):21-24